Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFAAC Access Control Installation: The Miami Gardens Owner’s Guide
FAAC access control installation in Miami Gardens typically runs between $450 and $1,150 installed, depending on whether we’re replacing a keypad, adding a receiver board, or wiring a full telephone-entry system. Most jobs are completed same day once the part is confirmed, because our trucks carry the most common FAAC boards, keypads, receivers, and antenna kits. If your FAAC remote stopped working or your keypad accepts the code but the gate won’t move, the access control module (not the motor) is usually the failure point.
The way most Miami Gardens owners discover the problem: they pull up to the gate, punch in the code, and nothing happens. Or the remote that worked for three years suddenly quits. Sometimes the gate opens on its own at 2 a.m. because a failing receiver is picking up stray signals from a neighbor’s system. What matters is that the FAAC board underneath that keypad is a documented part with known failure habits here, and we can usually name the issue within ten minutes of opening the enclosure.
Which FAAC Models This Applies To
We stock and install access control components for the FAAC 400, 402, 412, 415, 455 D, 750, 770, E024U, C720, C721, and S418 series, plus the XP15 and XP20 boards still running on older Miami Gardens properties. If your gate has a FAAC motor that predates the 400 series, call us with the board number and we’ll cross-reference it before you pay for anything.
Here’s the compatibility gotcha most owners don’t know: a FAAC 455 D board from 2012 will not accept the same decoder plug as one manufactured after 2018. The physical housing looks identical. The pin configuration changed. If you buy a used board online or pull one from a neighbor’s old swing gate, it may not communicate with your existing keypad at all. We match boards by the printed revision code on the silkscreen, not by the model number alone, because FAAC changed internal revisions without renaming the product line.
On the OEM versus aftermarket question: for receivers and antennas, a quality aftermarket part (Proteco, Nice, or JCM) often performs identically for $40 to $90 less. For logic boards and power supplies, we recommend OEM FAAC every time. The boards are sensitive to voltage fluctuation, and a cheap clone board paired with a Florida lightning season is a repair you’ll pay for twice.
Signs Your FAAC Access Control Installation Is Failing
- Remote works only within 15 feet of the gate. The receiver board’s range is degrading, usually from moisture intrusion or a failing capacitor. In Miami Gardens humidity, we see this on receivers past the five-year mark.
- Keypad accepts the code but the gate doesn’t respond. This points to a dead relay on the board or a broken wire between the keypad and the control box. The keypad isn’t the problem; the board isn’t reading the signal.
- Gate opens on its own, always at night. A failing receiver is drifting and picking up interference from a nearby gate, a garage door, or even a truck’s radio. This is a security issue, not a phantom.
- Keypad buttons stick or need hard presses. The membrane or rubber dome under the keypad face has deteriorated from UV and heat. Miami Gardens sun eats outdoor keypads faster than the manufacturer expects.
- After a power blink, the system forgets every saved code. The memory backup battery on the board is dead. It’s a replaceable coin cell on most FAAC boards, but you have to open the enclosure and photograph the board revision before ordering.
Before
AfterReplacement Cost & What’s Included
In Miami Gardens, here’s the honest pricing on FAAC access control work:
- Keypad replacement (FAAC or quality aftermarket): $180-$320 installed, including programming your existing codes.
- Receiver board replacement: $220-$400 installed, including pairing all remotes on site.
- Full access control module (board + receiver + keypad): $450-$750 installed, depending on the FAAC series and whether we rerun any low-voltage wire.
- Telephone entry / full keypad + intercom system: $800-$1,150 installed, including antenna, power supply, and programming all resident codes.
The range depends on three things: which FAAC board revision you have, whether the existing wiring is salvageable (we always test before we quote replacement), and whether the part is in our truck stock or needs an overnight order. Every price is written and handed to you before we touch a screw. That’s Haven Standard Clause 1. Under Clause 4, you get a photo log of the old board, the new board installed, and the wiring before we close the enclosure. Labor is flat-rated, not hourly, so the price on the page is the price on the invoice.
All FAAC access control work carries the 365-Day Done Right Promise: if the reader stops working or the board fails within a year, we return and fix it at no charge.
DIY or Call Us?
What you can safely check yourself: replace the keypad battery if yours is wireless, confirm the breaker hasn’t tripped, and verify the remote’s LED still lights up when you press a button. That’s the extent of it.
What we don’t recommend doing yourself: opening the FAAC control enclosure and swapping a board. These boards carry live 24V AC and, depending on the installation, 120V at the power supply terminals. You’re also dealing with low-voltage wiring where one crossed wire can burn a new board the moment power is restored. We’ve done this on 22,000+ gates since 2014, starting with the commercial access-control work Adrian Vance cut his teeth on, and even we photograph every connection before pulling one wire. If you’ve already opened the box and aren’t sure what you’re looking at, call (786) 789-0087 and describe what you see. We’ll tell you over the phone whether it’s worth a service call.
The other issue we see when owners try board swaps on their own: the wrong revision board goes in, the gate runs for two days, then the motor burns out. That’s a $600 to $900 motor job that a $20 phone call would have prevented. Name what you found, name what it costs, name what you left behind.
FAQs
Five to eight years is typical for a FAAC board in Miami Gardens weather. Humidity and salt air shorten that lifespan by roughly two years compared to inland installations. If your FAAC system is over seven years old and showing intermittent failures, replacement is more cost-effective than repeated board repair. Call (786) 789-0087 and we’ll assess your board’s condition on the visit.
We can sometimes repair a FAAC board when the problem is limited to a burnt relay or a failed capacitor, typically $90 to $150. If the board shows corrosion, multiple dead components, or a damaged power stage, repair is throwing money away. We’ll show you photos of what we found and give you a written recommendation. Call (786) 789-0087 and we’ll schedule the diagnostic.
A keypad or receiver swap takes 45 to 75 minutes from start to finish. A full module replacement with wiring cleanup runs two to three hours. Telephone-entry systems take half a day, including programming all resident codes. We tell you the exact time before we start, and we work until the system is tested and documented. Call (786) 789-0087 to book your slot.
Yes. Our Miami Gardens trucks carry FAAC keypads, XP15 and XP20 receivers, antennas, remotes, and the most common board revisions for the 400 and 455 D series. If your part isn’t on the truck, we order it and return within one to two business days. We also stock LiftMaster, Mighty Mule, and Ghost Controls parts for multi-brand properties. Call (786) 789-0087 and we’ll confirm the part before we dispatch.
Call Vance Gate Repair Miami Gardens
You’ve got a FAAC system that isn’t listening to you. That’s a problem we fix every week in Miami Gardens, from the neighborhoods along NW 183rd Street near the Calder Casino corridor to the gated communities east of the Turnpike. Call (786) 789-0087 and a live person answers, any hour. We’ll confirm your FAAC model, quote the installed price, and show up with the part on the truck. Written estimate before any work starts. Photo log when we leave. Done right for a full year.
Written by Adrian Vance, Owner, Vance Gate Repair Miami Gardens at Vance Gate Repair Miami Gardens, serving Miami Gardens and nearby areas.