Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Hollywood
New gate installation in Hollywood, FL typically runs $1,800 to $7,500 depending on the gate type, material, and whether automation is included. Most driveway gate installations we schedule in Hollywood take two to five working days from written quote to final walkthrough. If you’re replacing a rusted gate near the Intracoastal or installing a new HOA-compliant sliding gate in Emerald Hills, we give you the full price in writing before any metal is cut. Call (786) 789-0087 for a free on-site measure and written estimate.
Why Vance Gate Repair Miami Gardens Is Hollywood’s Preferred Gate Installation Company
We know Hollywood’s gate failures because we document every single Gate Repair - Hollywood job we open up. The salt-heavy air between the Atlantic and the Intracoastal eats steel components at a rate that surprises homeowners who moved here from drier parts of Broward. What looks like a simple hinge replacement in a Hollywood driveway often traces back to corrosion that started years earlier inside the post. We take photos of what we find, hand you a written scope with a flat price, and leave a photo log of the finished install. That’s the Haven Standard on every job: written price first, evidence on every visit, and a 365-Day Done Right Promise if something isn’t right. One full year, no argument, no fee.
Our technicians are background-checked and uniformed, and you get the name and photo of whoever is coming before they arrive. We answer the phone 24/7 with a live person, which matters when a security gate is stuck open at 2 a.m. near the Hollywood Beach Golf Course or a hurricane band has just rolled through western Hollywood. We don’t route you to a voicemail loop.
Adrian Vance founded this company in 2014 out of commercial access-control work, and that background shows up in how we install residential gates in Hollywood. Wiring diagrams on the control board. Limit switches set and photographed. Torque settings logged. You shouldn’t need to re-buy the same diagnosis a year from now because nobody wrote down what was done.
Our Gate Installation team handles everything from a single pedestrian gate to full automated double-gate systems with keypads and battery backup. And for homeowners across Hollywood, from the canal-lined streets of Harbour Lakes to the older lots near North Beach, we bring parts and hardware that are actually suited to this climate.
Our Gate Installation Services in Hollywood
Driveway Gate
Driveway gates in Hollywood take constant abuse: salt spray near the coast, canal humidity inland, and daily open-close cycles. When we install a driveway gate in an Oakridge or Emerald Hills property, we spec stainless steel hinges as standard, not plated. A galvanized hinge in Hollywood’s air often rusts through in five to eight years. Stainless lasts decades. We also set the gate’s sag correction on day one so the latch doesn’t bind six months later when the post settles into sandy soil.
Pedestrian Gate
A pedestrian gate next to a Hollywood driveway carries less weight, which is exactly why builders often cheap out on the hardware. We replace those flimsy stamped-steel hinges with marine-grade stainless or powder-coated aluminum, then align the gate to the latch so it doesn’t drag across a paver walkway. Near the Hollywood Lakes area, where older mid-century homes often have ornamental iron, we weld in repair sections where salt has thinned the pickets, so you keep the original look without keeping the original rust.
Sliding Gate
Sliding gates are the default for western Hollywood HOA communities built from the late 1970s through the 1990s, and they fail in predictable ways here. Ground-mounted operators flood during hurricane season, the rack and pinion corrodes, and the track picks up sand and debris. We install slide gate operators with elevated pads where possible, marine-grade board coatings, and battery backup so the gate still opens when FPL drops power. In Emerald Hills, we replaced a 1990s DoorKing slide gate operator whose control board was crusted with salt corrosion from canal-side humidity; the rack and pinion had seized, so we installed a new LiftMaster operator with stainless steel hardware and a marine-grade board coating, then reset the sag correction on the hinge post.
Swing Gate
Swing gates on Hollywood’s older canal properties run into two problems: the posts rot or rust at grade, and the leaf sags until the latch misses. We set new posts in concrete with stainless anchor hardware, and we calculate the swing arc to clear the driveway’s drainage slope, which matters on Hollywood lots that pool water during June storms. If automation is part of the install, we run conduit through the post rather than surface-mounting wires that get hit by mowers or chewed by canal rats.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Hollywood
We install and service whatever gate operator is already on your Hollywood property, and we stock parts for the brands most common in this market. LiftMaster and FAAC show up frequently in newer Hollywood installs. Elite and Mighty Mule units are common on mid-2000s residential gates throughout western Hollywood. We don’t steer you toward replacing a working motor because it isn’t our preferred brand. If a DoorKing board from 1992 is still functioning, we’ll say so. When it isn’t, we’ll show you the corrosion in the board and hand you a written price for the replacement before you commit.
Common Gate Installation Problems We See in Hollywood Homes
- Salt and canal humidity eating hardware: Hollywood’s position between the Atlantic and the Intracoastal, plus a dense grid of freshwater canals running inland, means galvanized hardware rusts through in five to eight years. We see the same failure on a $400 hinge and a $1,200 operator chassis. Stainless or powder-coated marine hardware is the only thing that holds up.
- Flooded ground-mounted operators: Every hurricane season, operators sitting below grade in western Hollywood fill with water and short the board. We raise new installs onto elevated pads and add a battery backup so the gate isn’t a dead slab when the power goes out.
- Obsolete HOA systems failing in clusters: Many 1980s and 1990s HOA gate systems in Hollywood were wired for loop detectors and keypads with no battery backup. After Broward tightened emergency-egress rules in the mid-2000s, communities patched instead of replaced. Those patch jobs are failing together now.
- Sagging gates on settling sandy soil: Hollywood sits on low-lying land with sandy soil. Gate posts shift, leaves sag, and the latch misses. We correct the sag, set posts with proper depth, and weld in reinforcement where the original install cut corners.
Pricing for Gate Installation in Hollywood, FL
Here’s the honest range for Hollywood. A standard single-leaf swing driveway gate, no automation, runs $1,800 to $3,200 installed. A sliding driveway gate with a new operator and keypad runs $3,500 to $6,500, depending on gate length and whether we need to pour a new track slab. A full double-gate automated driveway entry with intercom, battery backup, and stainless hardware starts around $5,500 and goes up from there for ornamental iron or custom work. Pedestrian gates run $700 to $1,800 installed with proper hardware. Every one of those prices is written down and handed to you before we start. No “call for a quote” after the fact. The price we agree on is the price you pay.
We Also Serve Cities Near Hollywood
Our crews also handle Gate Installation in North Miami Beach, Miami Gardens, Hialeah, and Miami. If you’re a Hollywood property manager with multiple HOA gates and a neighboring property in Miami Gardens, one phone call covers both. Call (786) 789-0087 and we’ll route the right tech to the right site.
Serving Hollywood, FL - Our Local Coverage Area
We’re based in the Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Hollywood
Hollywood’s canal grid holds moisture in the air year-round, and the city’s position between the Atlantic and the Intracoastal adds salt to that humidity. Pembroke Pines sits farther inland with better drainage and less salt-load, so the same operator that lasts 12 years there might fail in 8 here. The fix is marine-grade board coating, stainless hardware, and an elevated pad so the operator isn’t sitting in standing water after a storm. Call (786) 789-0087 for a free measure and a written price on a climate-suited install.
DoorKing and Linear were the dominant specs in Emerald Hills and similar western Hollywood HOAs built out during that era. Many of those units are still running on patchwork repairs and original boards that are now 30 to 40 years old. When one fails, the fix usually means a new LiftMaster or FAAC unit with battery backup and stainless hardware, plus a control board rated for coastal humidity. We can quote the replacement in writing after an on-site look.
Usually, yes. Sag comes from worn or corroded hinges, a shifted post, or a failed weld, not the gate leaf itself. We replace the hardware in stainless, reset the post if needed, weld in any cracked sections, and the gate sits level again. Full replacement only makes sense when the steel has thinned to the point that welding just creates new failure points, which happens faster near Hollywood’s canals than most people expect. Call (786) 789-0087 and we’ll give you the honest read, with photos.
Yes. Automatic gate operators in Hollywood must have functioning photo-eye safety beams that stop and reverse the gate if something crosses the path, plus edge sensors on the closing leaf. Many older HOA systems around Hollywood were grandfathered without them or had them disabled. We won’t install or repair an automated gate without bringing the safety edge and photo-eye circuit up to current code. It’s not optional, and we won’t sign off on a job that puts a kid or a delivery driver at risk.
Marine-grade stainless steel, full stop. Plated hardware fails within years here. Powder-coated aluminum holds up for gate frames where weight allows. Welds should be sealed and re-coated after install. Control boards should have conformal coating, and operators should be raised off grade with battery backup wired in. That spec costs more up front and it’s the only one that survives Hollywood’s air. Call (786) 789-0087 and ask for the marine-hardware spec on your quote.
If you’re ready for a gate installation in Hollywood with a written price, a documented install record, and a full year of warranty coverage, call us at (786) 789-0087. A live person answers, 24/7. We’ll schedule a free on-site measure, walk you through the options for your property, and put the number in your hand before you decide.
Written by Adrian Vance, Owner at Vance Gate Repair Miami Gardens, serving Hollywood, FL with documented gate installations and repairs since 2014.