Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Miami, FL
Gate access control is the repair call we handle most often in Miami, where a keypad that worked in February can short out by August from salt-air corrosion on its board. The city’s mix of 1920s wrought-iron estate gates in Coral Gables and 1980s HOA sliding gates in Kendall means no two jobs look alike, but the failure pattern is consistent: electronics corrode fast, steel bends in storms, and property managers need documentation for every dollar spent. Call (786) 789-0087 and you’ll get a written price before any work starts.
Why Miami Homes Are Different
Salt-laden air at near-100% humidity reaches every property in Miami, even miles inland from the Atlantic or Biscayne Bay. Standard gate motors and mild-steel hinges that last 10 to 15 years in Orlando fail here in 2 to 4. We see internal corrosion on LiftMaster and Elite control boards within 18 to 24 months in direct bay exposure in places like Key Biscayne and Coconut Grove, which is why we spec stainless hardware and potted boards on waterfront jobs without being asked.
Miami-Dade’s post-Hurricane Andrew codes add a regulatory layer: automated gates require permits and documented wind-load compliance. HOA communities in Doral, Kendall, and Hialeah run sliding gates with loop-detector entry, and most repair calls come through property managers who need photo evidence and a written scope. That documentation habit is built into how we work.
Our Main Miami Services
The two services Miami homeowners call about most are gate repair and gate installation, with motor and opener work close behind. Here is what each involves locally.
Gate Repair in Miami
Repair work in Miami usually means a gate that won’t open, a bent frame from a storm, or a hinge that’s rusted through. We diagnose the exact failure, quote a written price, and leave a photo record of what we found and what we set. Learn more on our Gate Repair in Miami page.
Gate Installation in Miami
New gate installations here must meet Miami-Dade wind-load standards and HOA architectural approvals. We handle the permit paperwork, the concrete work, and the automation, with a documented record at every stage. See details on our Gate Installation in Miami page.
Gate Motor & Opener in Miami
Motors fail early in Miami’s salt air, and operators lose alignment after 100+ mph wind events. We service nine major brands and stock boards and arms for faster turnaround during storm season. Read more on our Gate Motor & Opener in Miami page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterGate Access Control in Miami
Gate access control in Miami means keypads, phone entry, card readers, and intercoms that survive the same salt air that kills gate motors. In a city where most gated communities use loop detectors and credential systems, a down keypad doesn’t just stop one homeowner; it backs up an entire HOA’s entry point. We work on all the major systems, including LiftMaster, FAAC, and Linear, and our full Gate Access Control hub covers the scope of the work.
Keypad Entry
Signs you need it
The keypad works intermittently after rain, or some buttons stop registering.
What it costs in Miami
Replacing a wired keypad with a sealed outdoor unit typically runs $175-$295, while a full keypad-and-board retrofit runs $350-$650.
How we do it
We test the circuit, replace the keypad with a weather-sealed unit, reprogram codes, and photograph the new wiring.
Phone Entry
Signs you need it
Callers hear a busy signal, the relay doesn’t trigger, or the system loses caller ID in humid weather.
What it costs in Miami
Swapping a corroded phone-entry board typically runs $300-$600, and programming plus a new power supply runs $400-$800.
How we do it
We check line voltage, replace the board, verify relay operation, and document the new programming settings.
What Gate Access Control Costs in Miami
| Item | Typical range in Miami |
|---|---|
| Keypad replacement | $175-$295 |
| Phone entry board | $300-$600 |
| Full keypad and board retrofit | $350-$650 |
Can you fix a salt-corroded keypad the same day in Miami?
In most cases, yes. We stock sealed keypads and common control boards locally, and a Miami technician can usually complete the swap the same day. Call (786) 789-0087 for a written quote.
Do you handle HOA access control systems in Miami?
Yes, property managers in Doral, Kendall, and Hialeah call us regularly for loop-detector, keypad, and phone-entry service. We provide the photo documentation HOAs need. Call (786) 789-0087 for a written price.
Gate Parts & Welding in Miami
Gate welding in Miami mostly means repairing steel that’s been eaten by salt air or bent by hurricane-force winds. Wrought-iron and cast-iron gates from the 1920s through the 1950s in Coral Gables and Miami Beach need custom fabrication when a hinge ear or a decorative scroll breaks, and the only fix is a torch, not a parts catalog. Our Gate Parts & Welding hub covers the full scope of fabrication and replacement parts.
Hinge Replacement
Signs you need it
The gate sags, scrapes the ground, or the hinge pin is visibly rusted through.
What it costs in Miami
Replacing two standard hinges on a residential swing gate typically runs $150-$350, while heavy-duty or custom hardware runs $400-$800.
How we do it
We cut the old hinges, weld in new plates, align the gate, and photograph the finished welds.
Post Replacement
Signs you need it
The gate post wobbles, the concrete base is cracked, or the post leans after a storm.
What it costs in Miami
Replacing one gate post with new concrete typically runs $400-$900, and two posts run $700-$1,600.
How we do it
We remove the old post, set a new one in fresh concrete, rehang the gate, and document the new alignment.
What Gate Parts & Welding Costs in Miami
| Item | Typical range in Miami |
|---|---|
| Hinge replacement (2 hinges) | $150-$350 |
| Post replacement (1 post) | $400-$900 |
| Custom steel fabrication | $200-$1,200 |
Can you weld a wrought-iron gate without removing it from the property?
Most repairs are done on site. If the damage is severe, we’ll remove the gate leaf, fabricate in our shop, and rehang it. Call (786) 789-0087 for a written quote.
Do you fabricate replacement parts for vintage Miami gates?
Yes, we custom-fabricate scrollwork, hinge ears, and rail sections for 1920s through 1950s gates that have no catalog parts. The price is quoted in writing before we weld. Call (786) 789-0087 for a written estimate.
Brands We Service in Miami
We service LiftMaster, FAAC, BFT, and Linear systems regularly, with common boards, arms, and safety edges stocked locally for faster turnaround. For the full list, see our brands.
Pricing for Gate Repair in Miami, FL
| Service | Typical range in Miami |
|---|---|
| Keypad replacement | $175-$295 |
| Phone entry board | $300-$600 |
| Keypad and board retrofit | $350-$650 |
| Hinge replacement | $150-$350 |
| Post replacement | $400-$900 |
| Custom welding | $200-$1,200 |
| Gate motor replacement | $450-$900 |
| Control board replacement | $250-$550 |
Salt corrosion and storm damage push Miami prices toward the upper end of these ranges, but the quoted price is written and handed to you before any work starts. No surprise invoices, ever.
Neighborhoods We Serve in Miami
We dispatch crews throughout Miami, from Coral Gables to Kendall, with a typical response time of 60 to 90 minutes for gate repair calls.
- Coral Gables
- Kendall
- Coconut Grove
- Doral
- Key Biscayne
Service Area - Cities Near Miami
Our Miami crews also serve Miami Beach, FL, Hialeah, FL, Miami Gardens, FL, and North Miami Beach, FL.
Serving Miami, FL - Our Local Coverage Area
We’re based in the Miami area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Miami
Most repair calls in Miami get a technician on site within 60 to 90 minutes. A live person answers the phone 24/7. Call (786) 789-0087 for dispatch.
Repairs usually do not require a permit, but gate installations and new automation in Miami-Dade need wind-load documentation and HOA approval. We handle the paperwork. Call (786) 789-0087 for a written quote.
Yes, we work year-round, but June through November sees storm-related demand spikes. Emergency repairs are available during and after named storms. Call (786) 789-0087.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Miami Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.