Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Linear Keypad & Intercom Repair: The Miami Gardens Owner’s Guide
Linear keypad and intercom repair in Miami Gardens typically runs $165 to $385 installed, depending on the model and whether we’re replacing the keypad face, the intercom board, or the entire unit. We stock Linear-compatible keypads and intercom modules on our trucks, so most Miami Gardens calls are completed same-day. The way owners usually find us: the keypad works intermittently for a few weeks, then one morning the gate simply won’t open no matter how many times the code gets punched in.
Most failures we see in Miami Gardens aren’t the motor or the gate itself. It’s the keypad on the post or the intercom at the driveway. Humidity gets inside the housing, corrosion builds on the contact points, and the membrane starts missing digits. We diagnose the exact failure, match the Linear model, and hand you a written price before any work starts.
Key takeaways:
- We carry Linear keypads, intercom boards, and complete units on the truck for same-day repair in Miami Gardens.
- Installed cost runs $165 to $385 for most Linear keypad and intercom repairs.
- The written price comes before we touch anything. No surprise invoice at the end.
- Every repair gets a photo record of what was found and what was replaced.
Which Linear Models This Applies To
We work on the Linear keypad and intercom lines most common in Miami Gardens residential gates: the AK-11 exterior digital keypad, the AK-21, the AE-1000 telephone entry system, the AM3 intercom, and the older MVP series keypads that show up on gates installed in the early 2000s. If your gate has a Linear operator, chances are the keypad is an AK-series mounted on the entry post or a telephone entry unit at the driveway approach.
Here’s the compatibility gotcha most Miami Gardens owners run into: a Linear AK-11 and an AK-21 look nearly identical from the outside, but the wiring harness is different. The AK-11 uses a 4-wire configuration. The AK-21 adds a fifth wire for backlight control. A homeowner who orders the wrong keypad online usually discovers this after the gate still won’t respond. We match the part by the model sticker inside the keypad housing and the operator’s control board revision, not by what the keypad looks like from the street.
On OEM versus aftermarket: for Linear keypads, we stock genuine Linear when the part is still in production, because the membrane durability and weather sealing are measurably better than the offshore equivalents. For discontinued Linear models, we carry tested aftermarket replacements with the same wiring pinout. Adrian Vance developed this parts habit during years of commercial access-control work: match the electrical spec first, then decide what’s worth the markup.
Vance Gate Repair Miami Gardens is an independent service provider. We are not affiliated with Linear, but we stock and install Linear-compatible parts because so many Miami Gardens gates run on them.
Signs Your Linear Keypad & Intercom Repair Is Failing

- Intermittent keypad response. The code works sometimes, then nothing. The membrane contacts or the wiring terminals are corroded, usually from moisture intrusion through the back of the housing.
- Intercom audio is one-way. You can hear the visitor, but the visitor can’t hear you (or the reverse). One channel on the intercom board has failed, typically the audio amplifier stage.
- The gate opens without a code. A stuck relay on the keypad circuit board is holding the open command. In Miami Gardens humidity, relay contacts stick more often than people expect.
- Backlight stays on or never lights. The backlight circuit has a failed driver or shorted wire. On Linear keypads, this often signals moisture on the board.
- You hear a click but nothing happens. The keypad is sending signal, but the wiring to the operator has a break or bad splice. Common at the post base where weed trimmers cut the jacket.
Each of these failures has a specific fix. We don’t guess. We open the unit, check the board, check the harness, and give you a written diagnosis with the price to correct it.
Before
AfterReplacement Cost & What’s Included
Most Linear keypad and intercom repairs in Miami Gardens fall between $165 and $385 installed. Here’s the breakdown of what drives the range.
| Repair | Typical Installed Price |
|---|---|
| Keypad membrane replacement (AK-11/AK-21) | $165 - $225 |
| Keypad full unit replacement | $225 - $310 |
| Intercom board repair or replacement | $245 - $385 |
| Complete keypad + intercom replacement | $310 - $385+ |
The range depends on whether the existing wiring can be reused, whether the keypad housing is still watertight, and whether we need to splice new conductor at the post. The price on the written estimate is the price you pay. Under Haven Standard Clause 1, you get that price in writing before we pick up a tool. Parts and labor are itemized, and all work carries the 365-Day Done Right Promise: if the repair isn’t right, we make it right for a full year, no argument and no fee.
DIY or Call Us?

There’s an honest split here. You can check a few things at the keypad safely: visually inspect the housing for cracks or moisture, listen for the click when you enter a code, and look for obvious wire damage at the base of the post. Those observations help us on the phone before we dispatch.
What we don’t recommend: opening the keypad to test wiring with the operator powered. Linear keypads carry low voltage, but a crossed wire can damage the operator control board, and that turns a $200 keypad repair into a $700 board replacement. Keypads and intercoms are the low-risk entry point for gate owners, but the downstream components they connect to are not forgiving.
If you’ve got a Linear keypad or intercom acting up in Miami Gardens, call (786) 789-0087. We’ll name what we found, name what it costs, and leave you with a photo record of what we replaced.
FAQs
In south Florida humidity, we typically see 5 to 8 years from a Linear keypad before the membrane or board fails. Units mounted on the south or west side of a post, in direct afternoon sun, fail faster. The UV degrades the membrane face, and the temperature cycling opens micro-cracks that let moisture in. A keypad under a post cap or shaded by landscaping usually reaches the upper end of that range. If yours is older than 6 years and acting up, replacement is usually the better call over repairing the existing board. Call (786) 789-0087 and we’ll tell you exactly what you’ve got and what it needs.
Both, depending on what failed. If the issue is a worn membrane or a failed backlight driver, we can replace just that component and keep the existing housing. If the board has visible corrosion or a burned trace, full keypad replacement is the smarter repair. We only recommend repair when the fix will hold up for years. We’ll show you the failed part and explain the reasoning before you approve anything. Call (786) 789-0087 for a written diagnosis and price.
Most keypad replacements take one hour or less on site. Intercom board swaps run 60 to 90 minutes. If the wiring at the post needs re-splicing, add a little time, but we quote the labor flat on the written estimate. You know the price before we start.
Yes. We carry AK-11 and AK-21 keypads, AM3 intercom boards, and compatible aftermarket units for discontinued Linear models on every truck that runs Miami Gardens. We also stock parts for LiftMaster, Mighty Mule, and Ghost Controls operators, so if the problem turns out to be the operator and not the keypad, we can address it on the same visit. Call (786) 789-0087 and we’ll tell you what fits your gate before we head over.
Written by Adrian Vance, Owner, Vance Gate Repair Miami Gardens at Vance Gate Repair Miami Gardens, serving Miami Gardens and nearby areas.





Before
After
Before
After
Before
After